Anyone ever heard this If you drain all the water out of a fiberglass
pool it will pop out the ground.
Keep The Faith
Retta
Entries from July 2003
Question ?
July 30th, 2003 · 14 Comments
Tags: filters
Newbie and large hole in liner question!
July 28th, 2003 · 7 Comments
Hi everyone. Until I started looking for help, I never even thought
there was a group like this!
I have an above ground pool which has about a 2″ hole in it (we had a
storm and the canopy went in the pool and broke the liner). Not
thinking it was too big of a deal, when we went […]
Tags: pumps
Sun-Fun pools or USA Industries Sea Isle pool
July 26th, 2003 · 1 Comment
Anyone heard anything about Sun-Fun pools or USA Industries Sea Isle
or Ambassador pools? Had a presentation from them tonight for an AG
pool and don’t know what to think. Thanks in advance.
Tags: pumps
DE Leaking Into Pool
July 25th, 2003 · 3 Comments
Here is the best advice I can give you about that Perflex filter and
Superpump. JUNK THEM. The perflex is hard to work on compaired to the
universal grid models, parts are beyond expensive an the filter is just not
that good. The Superpump does not compare with the Super II. The Super II
is […]
Tags: filters
Treating water
July 20th, 2003 · No Comments
What type of shock did she use? If it was cal hypo then it takes along time
ot disolve but not that long so she must have put in alot. By canister type
I think you mean a cartridge type which is good so just keep running the pump
and clean the filter. As far as taking care […]
Tags: filters
Digest Number 69
July 19th, 2003 · No Comments
What kind and who is building it?
Tags: filters
Is my filter broken?
July 15th, 2003 · 8 Comments
Hi,
Finally refilled my pool after (hopefully) fixing a leak.
It’s very green and there is lots of rubbish on the bottom. I got the
hoover-on-a-pole out and started to clean it but as I went over the green
bits, the green seemed to go right through the filter and come belching back
out the pool inlet jet! Is this […]
Tags: heaters
How many hours to run filter
July 14th, 2003 · No Comments
The first thing to do is determine how many gallons your pool has in it. You
did not state the depth so I cannot tell. Formula LxWxaverage depthx7.5 or a
rectangular pool. Next is to check the manufacturers specs in the pump and
filter to see hoe many gallons per minute they pump. After you […]
Tags: filters
water mold?
July 12th, 2003 · 1 Comment
This is our first summer owning a pool. It’s an above ground 30′ and about 4 or
5′ deep.
We’ve been using Baquacil, and everything was fine until we left town for a few
days. The pump runs constantly, but when we got home, it needed to be
backwashed. The pool was VERY cloudy. We shocked it, but it […]
Tags: swimming pools
Treating water..
July 9th, 2003 · 3 Comments
This is my first time posting here, so please bear with me. I
treated my water yesterday evening at about 7 pm with Liquid shock. I
was wondering, how long after you shock your water can you get an
actual reading on the tests? I tested my water today at about 2 pm
and wondered if the results would […]
Tags: pumps